Write a Review

- Cover protects your bike from dirt and water when transporting it on the rear bike rack of your car - Easy to mount, very little impairment of visibility while driving, and suitable for trunk or hitch-mounted bike racks - Fits the contours of your bike with special straps - Material is durable, waterproof, and UV Protective - MTB version fits: Mountain bikes and e-bikes with handlebars up to 80cm - Road version Fits: Road Bikes with drop bars

- Cover protects your bike from dirt and water when transporting it on the rear bike rack of your car - Easy to mount, very little impairment of visibility while driving, and suitable for trunk or hitch-mounted bike racks - Fits the contours of your bike with special straps - Material is durable, waterproof, and UV Protective - MTB version fits: Mountain bikes and e-bikes with handlebars up to 80cm - Road version Fits: Road Bikes with drop bars

- Fits most: Cross Country, All Mountain, Enduro, Freeride, Downhill Bikes up to 29“, Gravel, Road, and Triathlon Bikes - For safe transport of road bikes and triathlon bikes, you need the BIKE STAND PRO - Smooth running skate wheels (replaceable) - Molded Polycarbonate Bike Block - Dimensions 138x39x85 cm - Weight 8.6 kg / 19 lbs

- Fits most: Cross Country, All Mountain, Enduro, Freeride, Downhill Bikes up to 29", Gravel, Road, and Triathlon Bikes - External, separate wheel compartments with DISC PROTECTION - Includes BIKE STAND PRO, CLIP ON WHEEL 2.0 and FRAME PAD - Smooth running skate wheels (replaceable)

The EVOC Bite Valve is a mouthpiece for the drinking tube of your Hydration Bladder. - Self-closing silicone stream valve - Leak-tight seal against escaping liquid - Taste-neutral material for pure flavor

Zipp's 303 Firecrest Tubeless wheels are designed for the real world—a world of imperfect conditions, varying road surfaces, and elements where the bottom line is simple: efficiency = speed. They're faster, lighter, and more capable over varied terrain—whether the surface is pavement in all its conditions or no pavement at all. Deeply rooted in Zipp's drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced wind resistance, rolling resistance, rider fatigue, and weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 32mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tire, boosting aero efficiency on the road. The wide rim stance also features less tire deflection for reduced rolling resistance. The combination of the wider tire, increased tire volume, and lower tire pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions—the tire and wheel system absorbs the shaking, not the rider. The 303 Firecrest Tubeless wheels are for dedicated cyclists who aspire to the latest in technology. They're for those who compete in races, against peers, or simply to conquer personal limits. - New Zipp graphics and cosmetic identity that scream speed - Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile - Lighter weight than its predecessor, making it nimble and fast - Tubeless Made Easy, optimized tire bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tire. - Ultra-wide 25mm rim profile creates a better tire interface to be fast on or off the road - 40mm rim depth makes a light and aero wheel in every situation - Ships with 12mm end caps - Center Lock rotor interface (lockring included)

The Whisky No.7 RD fork is a modern caliper road fork for road bikes with tapered steertubes. Their No.7 RD fork features a standard 9mm x 100mm QR axle. It offers low weight, precise handling, and clearance for 28c tires. This is a perfect upgrade fork for in lieu of a steel or alloy fork, and makes a great replacement fork for existing carbon product.

Wheels Manufacturing BB30 Bottom Bracket Adaptor for Hollowtech II Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.

Thread together bottom bracket for frames using the BBRight bottom bracket standard and SRAM DUB compatible cranks with 29mm spindle diameter. Two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Bottom Bracket Includes: - BB Cups with bearings - 2x - Silicone dust seals - 2x - 0.5mm crank spindle spacers - 2x - 1.0mm crank spindle spacers - 1x - 2.5mm crank spindle spacer - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: BBRight Press Fit - Bottom Bracket Shell Width: 79mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Diameter: 29mm - Tool Pattern: 48.5mm x 16 notch - Over Bearing Width: 91.5mm in 79mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields - Weight: 146g

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

- EVO E-Tour 20 24" single wall rim - Silver - Inner Rim Width: 19.8 mm - Rim Height: 16.8 mm - Pin joint construction - No Eyelets - Schrader valve - 36 holes

Rims: Evo Tour 19 700C / 29" - ETRTO 622-19 - Inner width: 19mm - 6061-T6 Alloy - Double Wall - Powder Coat satin black finish - CNC machined sidewalls - Drilled for Schrader valve - Rim or Disc Brake compatible - 36 holes Front hub: - QR 9x100mm (Quick Release binder included) - 6-Bolt ISO disc mount - 6061-T6 Alloy - Anodized black finish - Adjustable bearings - Rubber seals

Rims: Evo Tour 19 700C / 29" - ETRTO 622-19 - Inner width: 19mm - 6061-T6 Alloy - Double Wall - Powder Coat satin black finish - CNC machined sidewalls - Drilled for Schrader valve - Rim or Disc Brake compatible - 36 holes Rear hub: - QR 10x135mm (Quick Release binder included) - 6-Bolt ISO disc mount - 6061-T6 Alloy - Anodized black finish - Adjustable bearings - Rubber seals - HG freehub compatible with 8/9/10 speed

A scalpel for your trail bike. The best thing about trail bikes is how lightweight and playful they are, so the obvious thing to do is pair it with a set of lightweight carbon wheels. Enter the Faction, our most agile, highly accurate rim. With strength that punches well above its class, these 27mm internal width rims make your cross country/trail bike come alive. Available in 29er Diameter Only Factions are available as RIMS too!

UNION - ENDURO/FREERIDE CARBON WHEELSET The Union is a do-it-all carbon wheel, designed to shred anything that’s thrown at it. We took a three pronged approach to the creation of the Union; create a carbon rim that’s lightweight, has low radial stiffness and has extremely high impact resistance. Combining these three points with our unique layup design, we were able to achieve a truly impressive “quiver killing” rim. The Union’s design makes it the perfect choice to race enduro at high levels, shred the local trails on an afternoon ride or smash a solid day of shuttle laps. Available in 27.5" and 29er Diameters

Bluetooth and ANT+ Heart Rate Sensor with Calorie Tracking and Memory Every effort counts with the TICKR X. Designed to help you get the most out of any workout, the TICKR X tracks heart rate, calories burned, running analytics, and indoor cycling cadence. Equipped with Bluetooth and ANT+ technology, it connects to your favorite training apps, GPS watches, and bike computers, and now supports up to three simultaneous Bluetooth connections. Its new design makes it the lightest and slimmest heart rate monitor on the market, plus the new integrated heart rate sensor and strap design provide a more secure connection and fit! TICKR X even has 50 hours of onboard memory for heart rate and calorie data, giving you the freedom to train device-free. NEW! INTEGRATED CHEST STRAP DESIGN The integrated sensor and strap design of the TICKR X provides a more secure connection and a more secure fit to prevent sliding and shifting while working out. NEW! SLIM, LIGHTWEIGHT HEART RATE SENSOR POD At 1.7oz (48g) and 12.01mm thick, the TICKR is the lightest and slimmest heart rate monitor and strap combination on the market, not to mention the most comfortable! NEW! MULTIPLE SIMULTANEOUS BLUETOOTH CONNECTIONS TICKR X supports up to three simultaneous Bluetooth connections for a trouble-free start to your workout. NEW! TOP DISPLAY LED INDICATOR LIGHTS Two LED lights show visual confirmation of the TICKR X connection status via Bluetooth and / or ANT+: searching for a connections (blue slow blinking light), connecting (blue fast blinking light), and reading heart rate (red blinking at current beats per minute). NEW! ANT+ RUNNING DYNAMICS When TICKR X is paired with a GPS multi-sport or running watch, the ANT+ Running Dynamics will be broadcast on the TICKR X and recorded on the watch for real-time feedback. Seeing this data in real-time can help you make form adjustments, such as proper cadence, to improve your performance during your workout. DUAL-BAND ANT+ AND BLUETOOTH TECHNOLOGY Both ANT+ and Bluetooth capabilities allow for a wireless connection to both smartphones and GPS devices at the same time or separately. REAL-TIME HEART RATE, CALORIE, AND WORKOUT DURATION TRACKING TICKR X measures vital workout metrics, including heart rate, calorie burn, and workout duration in real-time with the Wahoo Fitness app. These metrics can also be sent to compatible third-party apps that track these metrics. FRONT SENSOR & STRAP CONNECTION The front connection on the TICKR X sensor and strap allows you to gear up and go quickly. You don’t have to fumble through side placements of snaps and hooks. COIN CELL BATTERY Includes a coin cell battery that can last for over 500 hours of workouts. INTERNAL MEMORY With on-board memory that can record your workout, the TICKR X allows you to leave your smartphone behind and still capture heart rate, calorie burn, and workout duration. The memory holds up to a 50 hours of workouts! INDOOR CYCLING CADENCE When paired with the Wahoo Fitness App and an indoor cycling workout is selected, the TICKR X will measure cycling cadence. RUNNING ANALYTICS The TICKR X has a built-in accelerometer that measures indicators of running form: Stride cadence, vertical oscillation, and ground contact time. TREADMILL MODE TICKR X features a special workout mode for tracking speed and distance data while running on the treadmill. After a completed calibration exercise in the Wahoo Fitness App, the TICKR X uses your ground contact time and time of workout, to accurately determine your distance and pace while running on a treadmill. WAHOO RUNNING SMOOTHNESS When using the Wahoo Fitness App, the TICKR X measures running form and efficiency across three dimensions that can help you improve your individual running form. ADVANCED PERFORMANCE MATERIAL STRAP Made from advanced performance materials, the TICKR X strap is designed to fit comfortably chest, yet stay securely in place during intense activity. APPLE WATCH AND APPLE TV INTEGRATION Connect directly via Bluetooth to your Apple Watch or Apple TV as another option for gathering heart rate data while you workout. THIRD PARTY APP COMPATIBILITY Works seamlessly with over 50 apps - including Zwift, The Sufferfest, Peloton for cycling and Runkeeper and MapMyRun for running. TECH SPECS - Physical Dimensions (LxWxH): "2.5"" L x 0.2"" W x 1.5"" H (6.3cm L x 1cm W X 3cm H) - Weight: 1.7 oz (48 g) with strap - Battery: Coin Cell (CR2032) - Battery Life: Over 500 active hours - Sweatproof: Yes (Handwashable Strap) - Water Rating: IPX7 (Waterproof up to 5 ft.) - Strap Length: Adjustable from 23" to 48" IN THE BOX - TICKR X heart rate pod - Adjustable soft strap - CR2032 Battery (installed) - Quick Start Guide - Important Product Info Guide

The extreme conditions racing tire Racing in rain, wind, and the kind of variable conditions where you pin your number on a gilet instead of a jersey? Rolling over sections of French pavé or chalky limestone gravel? Confronting rough chip seal or wet conditions – or a combination of both – that warrant letting a little air out of the tires on the start line? Those are the days the world’s strongest WorldTour pros choose the Corsa PRO Control. True to its name, the Control updates the Corsa PRO with additional grip for rain slicked tarmac, groomed gravel stretches, and treacherous cobblestones alike. The supple construction reduces rolling resistance, and increased puncture protection resists the occasional sharp gravel or cobble peak. Proven on the most grueling stones of Roubaix. Engineered for anything else the world can throw at it.

Vittoria's Mastik'One is a professional-grade tubular cement that has been trusted by the pros for decades. It provides excellent hold on both aluminum and carbon rims, and gives you the piece of mind that comes with knowing you're riding on the best. - Choose from 250-gram tin or 30-gram 12-pack - 30 grams is enough for one to two tires depending on surface area

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

Upgrade or refresh your bike. GENUINE REPLACEMENT PARTS When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered. PRODUCT DETAILS - Original equipment replacement Alex MD35 27.5 Boost wheels - Alex MD35 rim is double wall, pinned and disc-specific - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed

Our best pair of lights. Daytime running lights for visibility, and Kindbeam that lights the way while staying out of oncoming riders' eyes. Do the (b)right thing A ready-for-anything light set that pairs Daytime Running Light visibility with the bright commuter Pro RT front light. Kindbeam keeps more light on the path ahead of you while avoiding oncoming riders' eyes, for a bright light that won't blind oncoming riders. It's equipped with a visible fuel gauge, wireless connection to tail light, and charge-back that allows you to use the light as a battery bank to charge gadgets. All buttoned up with a Flare RT for the top light package for any ride. - See and be-seen light set for everything you need to ride with lights every ride, day or night - Commuter Pro RT with Kindbeam keeps light on the ground ahead of you and out of oncoming riders' eyes - Flare RT provides ultimate visibility for any road, city, or path - Specifically designed focus, flash, and range flash patterns for daytime visibility for up to 2km - Commuter Pro modes: high 1000LM — 1.5hrs, low 500LM — 3hrs, day flash 300 LM — 12hrs - Flare RT Flash modes: 90LM — 6hrs, 45LM — 12hrs, 5LM — 15hrs, Steady modes: 25LM — 4.5hrs, 5LM — 13.5hrs - Blendr-compatible for integrated mounting on compatible Blendr stems, helmets, and helmet mounts - USB-rechargeable with included USB-C and micro USB cable

GENUINE REPLACEMENT PARTS Get back on the road with genuine replacement parts. PRODUCT DETAILS - Keep your bike fresh - Includes routing port for rear light

Emonda SL 6 Disc Pro is the first carbon road bike in the lineup that gives you lightweight carbon wheels to match your lightweight frame. Aero tube shaping, disc brakes, and a high-performance drivetrain make it a great option for roadies who value great handling and lots of speed. It's right for you if... You're looking for every performance advantage on fast group rides and races, and you'd rather get the whole package now than make an upgrade to carbon wheels down the line. You also want the free speed of an aerodynamic frame. The tech you get A lightweight and aerodynamic 500 Series OCLV Carbon frame and fork, Bontrager Aeolus Elite 35 carbon wheels, a full Shimano Ultegra 11-speed drivetrain, and powerful Ultegra flat-mount disc brakes. The final word The best thing about this bike is that it pairs a super fast aero frame and high-end drivetrain with really nice carbon wheels. This upgrade makes it a worthy choice for any ride, from sprints on your local roads to pro stage races to hill climbing competitions. Why you'll love it - Lightweight parts to match the lightweight frame: with Emonda SL 6 Disc Pro, there's nothing left to upgrade - Aerodynamic tube shaping makes this our fastest Emonda SL platform ever—on flats and climbs alike - Hydraulic disc brakes give you stopping power and control in any weather, on any road - Like every Emonda, it's built to be the lightest and fastest in its class and it’s backed by our lifetime warranty - Confidence in carbon: if your Bontrager carbon wheels are damaged within the first two years of ownership, we'll repair or replace them for free

Emonda SL 6 Disc has all the advantages of an ultralight carbon road bike, with the added benefit of aero tube shaping that will make you faster on flats and up climbs, too. An ultra-smart and smooth SRAM Rival AXS wireless electronic drivetrain, lightweight carbon wheels, and an included power meter make this bike a great choice for fast roadies who want every performance advantage. It's right for you if... You're no stranger to long, fast rides and you're looking for an ultralight, aerodynamic bike with race-ready parts. You also want the incredible speed, precision, and clean looks of SRAM's newest wireless electronic drivetrain. The tech you get A lightweight and aerodynamic 500 Series OCLV Carbon frame and fork, a SRAM Rival eTap AXS 2x12 wireless electronic drivetrain, Rival AXS power meter, and Aeolus Elite 35 tubeless ready carbon wheels. The final word Yes, you can have it all: a super lightweight, aero frame for more speed on any terrain, exceptional handling characteristics, and an advanced wireless electronic drivetrain for lightning-fast shifts (even under load) and less maintenance. All without the sticker shock! Why you'll love it - Aerodynamic tube shaping makes this our fastest Emonda SL platform ever—on flats and climbs alike - The SRAM Rival eTap AXS wireless drivetrain won't leave a hole in your wallet, and you can fully customize your shift logic using the AXS app - The 12-speed cassette lets you be more precise about your cadence - This bike is fully capable of taking on the biggest climbs, steepest descents, and fastest sprints - Comes with a SRAM Rival AXS power meter for more effective training rides from the start

Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt

Marlin 6 is a cross country mountain bike built to give you an efficient off-road ride with a suspension fork that locks out, and smoother-shifting 2x8 drivetrain. It's made for mountain biking, but it's also equipped with features like rack and kickstand mounts that make it a great choice for adventurous daily commutes. It's right for you if... - You're testing the waters of off-road riding, and want a real mountain bike at a great value, with a wide range of gears to cover more ground on the road and trail. The tech you get - A lightweight aluminum frame with internal shift cable and brake hose routing to protect your cables and add to the bike's sleek look, an efficient 2x8 drivetrain, powerful hydraulic disc brakes, and a suspension fork that takes the edge off bumps and rough terrain, plus a lever that lets you easily lock the suspension so you don't waste energy on smooth terrain. The final word - Marlin 6 gives you upgrades you'll notice on every ride, like the suspension lockout and a really smooth-shifting Shimano drivetrain. Extra-strong, double-walled rims and powerful hydraulic disc brakes give you durability and stopping power for your most rugged adventures on the trail, in town, and everywhere in between. Why you'll love it - The 2x drivetrain gives you all the gears you need and none you don’t - Smaller frame sizes (XS and S) have short-reach brake levers that make it easier and more comfortable for riders with smaller hands to brake confidently - Marlin models in XS and S frame sizes have a curved top tube and a lower standover height that makes it easier for smaller riders to mount and dismount - Rack and kickstand mounts make it easy to accessorize, so your mountain bike can double as a rugged commuter - Like every model in the Marlin family, it's backed by Trek's lifetime warranty

Upgrade or refresh your bike. GENUINE REPLACEMENT PARTS When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered. PRODUCT DETAILS - Original replacement wheel - Does not include skewer, reflector, rim strip, valve, or owner's manual

Precaliber 24 8-Speed is a classic kids' bike with great style, performance, and durability. It has the simplicity of an 8-speed drivetrain and intuitive twist shift that makes it easy for kids to ride varied terrain. Plus, the strong yet lightweight aluminum frame stands up to even the roughest riders. For kids ages 8-12, between 51-59-inches tall. It's right for you if... Your kid loves to explore, and you want them to have a quality ride for all their road, path, or trail adventures. They're ready to upgrade from a singlespeed for a little extra help on hills and longer rides, but they don't need a ton of gears just yet. The tech you get A strong, lightweight aluminum frame that will stand up to whatever your youngster dishes out, with simple and reliable Shimano 8-speed shifting that makes it easy to climb hills. Plus, it has a kickstand, and a saddle with an integrated handle that can be swapped out for an integrated taillight mount. The final word Whether your kids are riding to school, racing around the neighborhood with friends, or tagging along on family rides, Precaliber 24 8-speed features the quality parts they need to ride with confidence and stay in control. Why you'll love it - Intuitive twist shift makes it easy for kids to switch gears when their terrain changes - You can replace the saddle's integrated handle with an integrated light mount to boost visibility on family adventures and solo excursions - This bike is hand-me-down heaven: it's built to last, so younger siblings can inherit this bike and it'll still feel like new - Like all Precaliber bikes, the frame is lower so it's easier for kids to stand over and hop on and off - You shouldn't buy your kid's bike where you buy your cereal—Unlike big box brands, Trek kids' bikes are assembled by people who know bikes

Slash 7 is a high-value all-mountain ripper that's built for shredding singletrack at full speed. It's got a stout aluminum frame and capable suspension package that can smash through gnarly, choppy descents like nobody's business. It's right for you if… You're an all-mountain rider who loves pinning steep descents and sketchy rock gardens. You want a bike that's born to plow through the roughest stuff at full tilt, is fully capable of racing enduro, and doesn't ring up at a bank-breaking price. The tech you get An aluminum frame built for harsh riding with a threaded bottom bracket, dual downtube guards, Knock Block 2.0, and 160mm of travel with a RockShox Select+ shock and 170mm Yari RC fork. Plus, a Shimano Deore/XT drivetrain, 4-piston brakes for confident descents, and Line Comp 30 wheels that are already completely tubeless ready, including sealant. The final word It may be the most affordable Slash in the lineup, but don't underestimate how fast it'll carry you down the mountain. You get a frame built for day after day of hard riding with a no-nonsense parts package that leaves enough cash in your pocket for enduro entry fees or a lift ticket to party laps. Why you'll love it: - It's equally at home between the tape and in the rugged wild-Slash excels at racing enduro, but it's ridiculously fun on gnarly trail rides, too - A sleek internal storage compartment gives you a versatile spot to stow tools and gear - We added a second down tube guard to better protect your frame from shuttle-related damage - New, removable Knock Block has a bigger steering angle to keep cables and hoses safe without sacrificing turning radius - Wider seat tube, wider dropper-the 34.9mm diameter post is stronger, more durable, and moves up and down faster

Top Fuel 9.7 is a quick and nimble full suspension carbon mountain bike that fuses the flat-out speed of a cross country bike with the trail-munching appetite of a trail bike. It lets you fly up climbs, hammer through flat sections, and keep on truckin' on rough descents. It's right for you if... You're looking for a do-it-all full suspension mountain bike that's fast and capable of hitting bigger stuff. You want the performance boost of a carbon frame, and you plan to put this bike through its paces on every style of trail, from flowy to techy. The tech you get A light and stiff full carbon frame, 120mm FOX Rhythm fork, 120mm of rear travel with a FOX Performance Float shock, and a 1x12 Shimano SLX/XT drivetrain. Plus 4-piston brakes for confident descents, a Bontrager Line Dropper, and Bontrager Line Comp 30 wheels that are already completely tubeless, including sealant. The final word Top Fuel 9.7 is an efficient and capable down country bike that's at home on flowy and technical trails. What sets this model apart is the lightweight carbon frame and solid parts spec that make for great performance at a great value. Why you'll love it - The full carbon frame gives you a light, responsive ride - This bike's killer suspension setup is both efficient and ready to party - A sleek internal storage compartment gives you a versatile spot to stow tools and gear - New, removable Knock Block has a bigger steering angle to keep cables and hoses safe without sacrificing turning radius Wheel size: - Size X-Small: 27.5-inch - Sizes Small – X-Large: 29-inch